品牌:ABB
ABB:3BUS212310-001
起订:1个
供应:99个
发货:3天内
立即购买
随着不同设备和网络之间连接的不断发展，对工业自动化和工业物联网 (IIoT) 系统的攻击也在不断发展。制造企业必须规划和执行有效的纵深防御战略，并对其安全措施进行持续的评价和调整。
根据Symantec公司2018年《互联网安全威胁报告》，在过去一年中，与工业控制系统 (ICS) 相关的漏洞增加了29%。鉴于这些系统所连接和控制的过程，对于安全至关重要，安全漏洞可能会导致代价高昂、影响广泛且异常危险的危害。
恶意工业控制系统攻击，可能包括丧失显示、操纵显示、拒绝控制、操纵控制和失去控制。后果可能包括危险故障和长时间停机。未经授权的进入，可能会危害员工和公众的安全，并会造成停机、知识产权泄露和市场份额损失，从而影响公司的利益。
事关重大，想要弄清楚从哪里开始，可能会倍感压力。通过分析和审核工业控制系统资产和工艺流程，企业可以更好地了解对安全、可靠性和安保的威胁。安全审核是一个很好的起点，应该包括以下3个简单步骤:
1.清点资产
虽然看起来很简单，但大多数企业并不完全清楚，他们需要保护的资产有哪些，如可编程逻辑控制器 (PLC)、人机界面 (HMI)、监控和数据采集 (SCADA)系统等等。根据资产的共同属性将其分类，并了解每个资产的数据属性。该工作是非常重要的起始点，因为如果企业不知道需要保护什么，就无法提供保护。
2.清点网络
资产库存使企业能够了解连接到网络的有形资产。下一步是了解这些资产是如何通过网络结构和配置连接起来的。了解数据可能的传输路径，可以显示攻击者如何访问此数据。企业网络的物理和逻辑图，将为企业安全审计的第3步取得成功奠定基础.
3.清点数据流
了解数据流至关重要。由于工业自动化中使用的许多协议，没有提供保护流量的措施，因此许多攻击可以在没有任何阻力的情况下进行：只需访问网络并了解协议即可。了解端口、协议、终点和时间需求 (确定性与否) ，可帮助了解在第2步中确定的网络资产，哪些资产会有数据流经。
设计和维护工业控制系统和网络基础设施的团队成员，可以执行这些步骤。这些步骤完成后，就对资产、它们之间的连接方式以及数据如何在网络上流动到每个终端有一定的了解。要进入网络及资产，攻击者必须突破这三个已知域中的一个。他们需要在网络中增加新资产；修改网络配置以获得对网络各层的访问权限；操纵现有设备与新的终端对话，并创建新的数据流。
有了安全措施，并不意味着“设定，忘记它”。在这种不断演变的威胁格局中，昨天的最佳做法，今天也许已经不能满足要求。通过安全审计，企业可以深入了解工业控制系统系统中的资产和数据流，为实施纵深防御策略、工业控制系统网络安全计划做好准备。为了获得收益，确保知识产权和生产线上工作人员的安全，采取必要措施提高工业控制系统的安全性，这比以往任何时候都更加重要。
-----------------------------
现货促销，欢迎咨询 销售一部：18050036945微信同号
+++QQ：3443643092
本公司有大量库存现货，全新原装，欢迎订购，当天可发货！！！！！！
联系人：杨丽君（销售工程师）
产品图片、价格、产品属性等资料，仅供参考，具体以询价时为准，如需详细技术资料请联络，欢迎在线或来电咨询
注：下班时间请加QQ给我留言，留下公司及联系方式，我会在24小时内给您回复，非常感谢！
---------------------------------------------------------------
| IC695ALG412 | High Speed 12 channel isolated thermocouple module with increased noise rejection. Requires firmware and software 6.5 and higher. |
| IC695ALG412CA | Conformal Coated. High Speed 12 channel isolated thermocouple module with increased noise rejection. Requires firmware and software 6.5 and higher. |
| IC695ALG508 | RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032 |
| IC695ALG508CA | Conformal Coated RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032 |
| IC695ALG508LT | Low Temperature Tested RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS0 |
| IC695ALG600 | UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG ConFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP. Terminal block ordered separately. |
| IC695ALG600CA | Conformal Coated Universal Analog Input module. Terminal block not included. |
| IC695ALG600LT | Low Temperature Tested (-40 to 60C) UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG ConFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP. Terminal block ordered separately. |
| IC695ALG608 | Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The analog i |
| IC695ALG608CA | Conformal Coated Analog Input Module, 8 Channel voltage/current. Module does not include terminal block. |
| IC695ALG608RS | Refurbished Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. |
| IC695ALG616 | Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The analog |
| IC695ALG616CA | Conformal Coated Analog Input Module,16 channel voltage/current. |
| IC695ALG616RS | Refurbished Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. |
| IC695ALG626 | Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The ana |
| IC695ALG626RS | Refurbished Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5 |
| IC695ALG628 | Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The anal |
| IC695ALG628RS | Refurbished Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V |
| IC695ALG704 | Analog Output Module, 4 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC694T |
| IC695ALG704CA | Conformal Coated Analog Output Module,4 channel voltage/current. Module does not include terminal block. |
| IC695ALG708 | Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC694T |
| IC695ALG708CA | Conformal Coated Analog Output Module,8 channel voltage/current. Moduledoes not include terminal block. |
| IC695ALG708LT | Low Temperature Tested (-40 to 60C) Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires |
| IC695ALG728 | Analog Output HART Module, 8 channels,that is configurable for voltage, current, current/HART configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity termina |
| IC695ALG808 | Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695ALG808CA | RX3i Isolated Analog Output module conformal coated, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032. |
| IC695CBL001 | Energy Pack Cable, 3 ft. (0.91m) |
| IC695CBL003 | Replacement Cable for CPE400 Energy Pack |
| IC695CEP001 | RX3i CEP CARRIER W/ RJ45 COPPER ETHERNET |
| IC695CHS007 | 7 Slot Universal base. Slot 0 limited to power supply (IC695PSxxx) only and slot 6 is a PCI slot only (IC695xxx). Slots 1 through 5 support both PCI and high speed serial connection (IC695xxx and IC694xxx) |
| IC695CHS007CA | RX3I 7-SLOT UNIVERSAL BACKPLANE, ConFORM |
| IC695CHS007LT | RX3i 7-slot Universal Backplane Low Temperature tested. |
| IC695CHS012 | RX3i 12 slot universal base |
| IC695CHS012CA | RX3i 12 slot universal backplane. Conformal Coated. |
| IC695CHS012LT | Low Temperature Tested (-40 to 60C) RX3i 12 slot universal base |
| IC695CHS016 | RX3i 16 universal modules slots base |
| IC695CHS016CA | RX3i 16 universal slots backplane with conformal coating. |
| IC695CHS016LT | Low Temperature Tested (-40 to 60C) RX3i 16 universal modules slots base |
| IC695CMM002 | RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| IC695CMM002CA | RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. Conformal Coated |
| IC695CMM002LT | Low Temperature Tested (-40 to 60C) RX3i serial communications module. Two isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| IC695CMM004 | RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| IC695CMU310RS | Refurbished The CMU310 is on marketing hold due to component shortage. Please quote IC695CRU320 High Availability and request special pricing to match IC695CRU320 and IC695RMX128. RX3i Redundant High Availability CPU with two built-in serial ports. TheCP |
| IC695CMX128 | Control Memory Xchange Module 128Megbytes of user shared memory. |
| IC695CPE305 | CPE305 single slot CPU, 1.1Ghz processor,5 Meg user memory, 1 RS-232 port (compatible with IC693CBL316 cable), 1 Ethernet port (SRTP and Modbus). Ships with Energy PAC (IC695ACC400 and IC695CBL001 connection cable). |
| IC695CPE305CA | Conformal Coated. CPE305 single slot CPU, 1.1Ghz processor,5 Meg user memory, 1 RS-232 port (IC693CBL316 cable), 1 Ethernet port (SRTP Programmer support only) and a USB master port upload/download only. Ships with Energy PAC IC695ACC400). |
| IC695CPE305LT | RX3i CPE305, 1 serial port, 1 Ethernet port l low temperature tested. |
| IC695CPE310 | CPE310 2 slot CPU, 1.1Ghz processor,10 Mg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP, Modbus) and USB master port for application upload/download. Replacement for IC695CPU310. CPE310 ships with Energy PAC (IC695ACC400 and IC695CBL001). |
| IC695CPE310CA | Conformal Coated. CPE310 2 slot CPU, 1.1Ghz processor,10 Meg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP programmer support only) and USB master port for application upload/download only.Replacement for IC695CPU310. CPE310 ships with Ene |
| IC695CPE310LT | Low Temperature Tested (-40 to 60C) CPE310 2 slot CPU, 1.1Ghz processor,10 Mg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP, Modbus) and USB master port for application upload/download. Replacement for IC695CPU310. CPE310 ships with Energy |
| IC695CPE330 | 2 SLOT, DUAL CORE, 1GHZ 64MB CPU WITH ET |
| IC695CPE330CA | RX3I, 2 SLOT, DUAL CORE, 1GHZ 64MB CPU W |
| IC695CPE400 | PACSystems RX3i Rackless CPU, 6 Ethernet ports, PREDIX enabled, mounting plates |
| IC695CPK330 | RX3I CPE330 WITH ENERGY PACK |
| IC695CPK330CA | RX3I CPE330 WITH ENERGY PACK CONF COAT |
| IC695CPK400 | PACSystems RX3i Rackless CPU with mounting plates and Energy Pack |
| IC695CPU315 | 1Ghz CPU with 20Meg of memory 2 SERIAL PORTS (occupies two slots on system base). Battery not included, order external high capacity battery IC693ACC302 seperately. Estimate data retention is 30 days at 20C of continous battery back up. |
| IC695CPU315CA | RX3I 1GHZ CPU W/2 SER PORTS CONF COAT |
| IC695CPU320 | 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). Battery not included, order external high capacity battery IC693ACC302 seperately. Estimate data retention is 30 days at 20C of continous battery back up. |
| IC695CRU320 | 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 supports both Genius LAN and Ethernet LAN. Dual Genius LAN is supported by an application c |
| IC695CRU320CA | Conformal coated. 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 will only work with RX3i ENIU remote I/O and Genius LAN. |
| IC695CRU320QP | QuadPAC redundant controller. 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). External high capacity battery IC693ACC302 required. |
| IC695DEM008 | Fieldbus Demo Case: RX3i and Fieldbus |
| IC695ECM850 | RX3I IEC 61850 COMMUNCIATION MODULE |
| IC695EDS001CA | RX3I DNP3 ETHERNET OUTSTATION -CONF COAT |
| IC695EIS001 | PACSYSTEMS RX3I IEC-60870-5-104 SERVER [ |
| IC695ETM001 | Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base |
| IC695ETM001CA | RX3i Ethernet Mdl,10/100Mbits,Conformal Coated. |
| IC695ETM001LT | Low Temperature Tested (-40 to 60C) Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base |
| IC695GCG001 | RX3I GENIUS COMMUNICATIONS GATEWAY |
| IC695HSC304 | RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch. |
| IC695HSC308 | RX3i High Speed Counter, 8 channels. 16 configurable inputs and 14 configurable outputs. Supports high speed counting, interrupts and programmable limit switch. Module requires PCI bus with terminal block IC694TBxx32E (E) revision and above. |
| IC695LRE001 | RX3i Local Expansion Module Occupies no system slots on base |
| IC695LRE001CA | RX3i Local Serial Expansion Conformal Coated. |
| IC695MDL664 | Smart Digital 24VDC Input module, 16 input channels in two groups of eight. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695MDL664CA | Conformal Coated. Smart Digital 24VDC Input module, 16 input channels in two groups of eight. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695MDL765 | Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695MDL765CA | Conformal Coated. Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points. Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required. |
| IC695NIU001 | RX3i NIU with two serial ports and 20K of local logic. Module requires Universal base (IC695CHSxxx) and requires Ethernet module (IC695ETM001).NIU supports all RX3i I/O modules. |
| IC695NIU001CA | RX3i NIU, requires Ethernet module to be fully functional. Module is conformal coated. NIU only works in RX3i universal base. |
| IC695NKT001 | RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base. |
| IC695NKT001CA | RX3i Ethernet NIU Kit Conformal Coated includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base. |
| IC695NKT002 | RX3i Ethernet NIU Kit with two Ethernet modules. |
| IC695NKT002CA | RX3i one NIU001 and two ETM001 Conformal |
| IC695PBM300 | RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). The mo dule supports PROFIBUS V1 Master functionality. |
| IC695PBM300CA | RX3i PROFIBUS Master, Conformal Coated, Module (must be installed on RX3i PCI bus). The module supports PROFIBUS V1 Master functionality. |
| IC695PBM300LT | RX3i Profibus Master Module Low Temp |
| IC695PBS301 | RX3i Profibus Slave module supports V1 functionality. |
| IC695PNC001 | |
| IC695PNC001CA | Conformal Coated. Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310 and |
| IC695PNC001LT | Low Temperature Tested (-40 to 60C) Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, |
| IC695PNS001 | RX3I PROFINET SCANNER MODULE (WEB UPGRAD |
| IC695PNS001CA | RX3I PROFINET SCANNER MODULE |
| IC695PRS015 | Pressure Transducer module. The serial port communicates with up to 15 Honeywell LG1237 Smart Pressure Transducer sensors. Requires firmware/software 6.5 or higher. |
| IC695PSA040 | RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base. |
| IC695PSA040CA | RX3i AC Power Supply, 40 Watt Conformal Coated |
| IC695PSA040LT | Low Temperature Tested (-40 to 60C) RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base. |
| IC695PSA140 | 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load -sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplane, o |
| IC695PSA140CA | RX3i Conformal Coated 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application. |
| IC695PSA140LT | Low Temperature Tested (-40 to 60C) 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the on |
| IC695PSD040 | RX3i 24VDC power supply, 40 watts. |
| IC695PSD040CA | RX3i 24VDC power supply, 40 Watt Conformal Coated. |
| IC695PSD040LT | RX3i 24VDC Power Supply, 40 Watt Low Temperature tested |
| IC695PSD140 | Multipurpose Power Supply is suitable for use in load-sharing and redund ancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. |
| IC695PSD140CA | 24VDC Multipurpose Power Supply ConFORMAL COATED is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplan |
| IC695PSD140LT | RX3i Multi function 24VDC PS, 40W Low temperature tested |
| IC695RMX128 | RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory. Dual Genius LAN is supported using application code that is located on the ge-ip.com/support website. |
| IC695RMX128CA | Conformal coated. RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory. |
| IC695RMX228 | RX3I ConTROL MEMORY XCHANGE MDL, 10 KM |
| IC695SOE001 | RX3I SOE NIU STATION |
| IC695SPC100 | RX3i 10/100/1000base-TX (CAT5 100m) Small Form Pluggable Transceiver |
| IC695SPF002 | RX3i Multimode, 100base-FX (fiber 2km) Small Form Pluggable Transceiver Module |
| IC695SPF010 | RX3i Single 1000base-LX (fiber 10 km) Small Form Pluggable Transceiver Module |
| IC695SPF550 | RX3i 1000base-SX (fiber 550 m) SFP (Multi-mode fiber - MMF)RX3i 1000base-SX (fiber 550 m) SFP (Multi-mode fiber - MMF) |
| IC695CMM004LT | Low Temperature Tested (-40 to 60C) RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. |
| GFK-2222 | PACSystems CPU Reference Manual |
| GFK-2314 | PACSystems RX3i System Manual |
| 44A752252-G02 | PACSystems RX7i CPU CPE010 firmware upgrade kit |
| 44A752255-G02 | PACSystems RX7i CPU CPE020 firmware upgrade kit. |
| 44A752256-G02 | PACSystems RX7i Ethernet module firmware upgrade kit. |
| 44A753071-G01 | Replacement screws for RX7i modules. 10 screws in a kit. |
| 44A753080-G01 | Firmware upgrade for RX7i RMX and CMX memory exchange modules. |
| 44A735709-001 | FAILURE ANALYSIS SERV. PLC |
| IC695ACC302 | Auxiliary Smart Battery Module for PACSystems. Provides low battery signal to the CPU. Module mounts external to the controller. |
| IC698ACC701 | RX7i CPU Lithium Battery and Spare Door |
| IC698ACC720 | Shielded double slot faceplate, package of six. |
| IC698ACC735 | Shielded single slot faceplate, package of six. |
| IC698CHS009 | RX7i 9 Slot Rear Mount Rack |
| IC698CHS017 | RX7i 17 Slot Rack Wall (Rear) Mount |
| IC698CHS109 | RX7i 9 Slot Rack Front Mount |
| IC698CHS117 | RX7i 17Slot Rack Front Mount |
| IC698CHS117CA | RX7i 17Slot Rack Front Mount Conformal Coated |
| IC698CHS217 | RX7i 17 Slot Rack Rear I/O Mount |
| IC698CMX016 | PACSystems RX7i Control Memory Xchange 16MB Memory |
| IC698CPE010 | Do not quote. Product discontinued. RX7i 300mhz CPU with Ethernet 10/100 |
| IC698CPE020 | RX7i 700mhz CPU with Ethernet 10/100 |
